Android predictive back

To support Android 14's Predictive Back feature, a set of ahead-of-time APIs have replaced just-in-time navigation APIs, like WillPopScope and Navigator.willPop.

Android 14 introduced the Predictive Back feature, which allows the user to peek behind the current route during a valid back gesture and decide whether to continue back or to cancel the gesture. This was incompatible with Flutter's navigation APIs that allow the developer to cancel a back gesture after it is received.

With predictive back, the back animation begins immediately when the user initiates the gesture and before it has been committed. There is no opportunity for the Flutter app to decide whether it's allowed to happen at that time. It must be known ahead of time.

For this reason, all APIs that allow a Flutter app developer to cancel a back navigation at the time that a back gesture is received are now deprecated. They have been replaced with equivalent APIs that maintain a boolean state at all times that dictates whether or not back navigation is possible. When it is, the predictive back animation happens as usual. Otherwise, navigation is stopped. In both cases, the app developer is informed that a back was attempted and whether it was successful.

The PopScope class directly replaces WillPopScope in order to enable predictive back. Instead of deciding whether a pop is possible at the time it occurs, this is set ahead of time with the canPop boolean. You can still listen to pops by using onPopInvoked.

PopScope(
  canPop: _myPopDisableEnableLogic(),
  onPopInvoked: (bool didPop) {
    // Handle the pop. If `didPop` is false, it was blocked.
  },
)

These two new parameters are based on PopScope and replace the deprecated Form.onWillPop parameter. They are used with PopScope in the same way as above.

Form(
  canPop: _myPopDisableEnableLogic(),
  onPopInvoked: (bool didPop) {
    // Handle the pop. If `didPop` is false, it was blocked.
  },
)

This getter synchronously returns the RoutePopDisposition for the route, which describes how pops will behave.

if (myRoute.popDisposition == RoutePopDisposition.doNotPop) {
  // Back gestures are disabled.
}

Use these methods to register PopScope widgets, to be evaluated when the route decides whether it can pop. This functionality might be used when implementing a custom PopScope widget.

@override
void didChangeDependencies() {
  super.didChangeDependencies();
  final ModalRoute<dynamic>? nextRoute = ModalRoute.of(context);
  if (nextRoute != _route) {
    _route?.unregisterPopEntry(this);
    _route = nextRoute;
    _route?.registerPopEntry(this);
  }
}

The direct replacement of the WillPopScope widget is the PopScope widget. In many cases, logic that was being run at the time of the back gesture in onWillPop can be done at build time and set to canPop.

Code before migration:

WillPopScope(
  onWillPop: () async {
    return _myCondition;
  },
  child: ...
),

Code after migration:

PopScope(
  canPop: _myCondition,
  child: ...
),

For cases where it's necessary to be notified that a pop was attempted, the onPopInvoked method can be used in a similar way to onWillPop. Keep in mind that while onWillPop was called before the pop was handled and had the ability to cancel it, onPopInvoked is called after the pop is finished being handled.

Code before migration:

WillPopScope(
  onWillPop: () async {
    _myHandleOnPopMethod();
    return true;
  },
  child: ...
),

Code after migration:

PopScope(
  canPop: true,
  onPopInvoked: (bool didPop) {
    _myHandleOnPopMethod();
  },
  child: ...
),

A very common use case of WillPopScope was to properly handle back gestures when using nested Navigator widgets. It's possible to do this using PopScope as well, but there is now a wrapper widget that makes this even easier: NavigatorPopHandler.

Code before migration:

WillPopScope(
  onWillPop: () async => !(await _nestedNavigatorKey.currentState!.maybePop()),
  child: Navigator(
    key: _nestedNavigatorKey,
    …
  ),
)

Code after migration:

NavigatorPopHandler(
  onPop: () => _nestedNavigatorKey.currentState!.pop(),
  child: Navigator(
    key: _nestedNavigatorKey,
    …
  ),
)

Previously, Form used a WillPopScope instance under the hood and exposed its onWillPop method. This has been replaced with a PopScope that exposes its canPop and onPopInvoked methods. Migrating is identical to migrating from WillPopScope to PopScope, detailed above.

Route's willPop method returned a Future<RoutePopDisposition> to accommodate the fact that pops could be canceled. Now that that's no longer true, this logic has been simplified to a synchronous getter.

Code before migration:

if (await myRoute.willPop() == RoutePopDisposition.doNotPop) {
  ...
}

Code after migration:

if (myRoute.popDisposition == RoutePopDisposition.doNotPop) {
  ...
}

Internally, ModalRoute kept track of the existence of WillPopScopes in its widget subtree by registering them with addScopedWillPopCallback and removeScopedWillPopCallback. Since PopScope replaces WillPopScope, these methods have been replaced by registerPopEntry and unregisterPopEntry, respectively.

PopEntry is implemented by PopScope in order to expose only the minimal information necessary to ModalRoute. Anyone writing their own PopScope should implement PopEntry and register and unregister their widget with its enclosing ModalRoute.

Code before migration:

@override
void didChangeDependencies() {
  super.didChangeDependencies();
  if (widget.onWillPop != null) {
    _route?.removeScopedWillPopCallback(widget.onWillPop!);
  }
  _route = ModalRoute.of(context);
  if (widget.onWillPop != null) {
    _route?.addScopedWillPopCallback(widget.onWillPop!);
  }
}

Code after migration:

@override
void didChangeDependencies() {
  super.didChangeDependencies();
  _route?.unregisterPopEntry(this);
  _route = ModalRoute.of(context);
  _route?.registerPopEntry(this);
}

This method was previously used for a use-case very similar to Predictive Back but in the Cupertino library, where certain back transitions allowed canceling the navigation. The route transition was disabled when there was even the possibility of a WillPopScope widget canceling the pop.

Now that the API requires this to be decided ahead of time, this no longer needs to be speculatively based on the existence of PopScope widgets. The definitive logic of whether a ModalRoute has popping blocked by a PopScope widget is baked into ModalRoute.popDisposition.

Code before migration:

if (_route.hasScopedWillPopCallback) {
  // Disable predictive route transitions.
}

Code after migration:

if (_route.popDisposition == RoutePopDisposition.doNotPop) {
  // Disable predictive route transitions.
}

WillPopScope was sometimes used to show a confirmation dialog when a back gesture was received. This can still be done with PopScope in a similar pattern.

Code before migration:

WillPopScope(
  onWillPop: () async {
    final bool? shouldPop = await _showBackDialog();
    return shouldPop ?? false;
  },
  child: child,
)

Code after migration:

return PopScope(
  canPop: false,
  onPopInvoked: (bool didPop) async {
    if (didPop) {
      return;
    }
    final NavigatorState navigator = Navigator.of(context);
    final bool? shouldPop = await _showBackDialog();
    if (shouldPop ?? false) {
      navigator.pop();
    }
  },
  child: child,
)

1. Run Android 14 (API level 34) or above.
2. Enable the feature flag for predictive back on the device under "Developer options". This will be unnecessary on future versions of Android.
3. Set android:enableOnBackInvokedCallback="true" in android/app/src/main/AndroidManifest.xml. If needed, refer to Android's full guide. for migrating Android apps to support predictive back.
4. Make sure you're using version 3.14.0-7.0.pre of Flutter or greater.
5. Make sure your Flutter app doesn't use the WillPopScope widget. Using it disables predictive back. If needed, use PopScope instead.
6. Run the app and perform a back gesture (swipe from the left side of the screen).

Landed in version: 3.14.0-7.0.pre
In stable release: 3.16

API documentation:

• PopScope
• NavigatorPopHandler
• PopScope
• NavigatorPopHandler
• PopEntry
• Form.canPop
• Form.onPopInvoked
• Route.popDisposition
• ModalRoute.registerPopEntry
• ModalRoute.unregisterPopEntry

Relevant issues:

• Issue 109513

Relevant PRs:

• Predictive Back support for root routes
• Platform channel for predictive back

Unless stated otherwise, the documentation on this site reflects the latest stable version of Flutter. Page last updated on 2024-08-19. View source or report an issue.